Key Facts
- Headline: Figure AI Trains Retired Robots to Dive Into Molten Steel.
- Figure AI retired its fleet of Figure 02 humanoid robots after concluding that the machines were no longer maintainable.
- The company said it chose complete destruction to protect custom-built actuators and other intellectual property from leaks.
- Foundries in the United States and Mexico declined to accept robots containing lithium-ion batteries, citing risks to expensive equipment.
- A steel foundry in Imatra, Finland, agreed to carry out the decommissioning.
- Figure trained its robots in simulation to jump off cliffs before transporting them to the Finnish facility.
- The robots jumped autonomously despite extreme heat and electromagnetic fields.
- A 75-ton electric arc furnace completed the destruction in 24 hours and six melts.
- Arnold Schwarzenegger had suggested melting the robots and made a cameo during the process.
- Metal bars made from the remains were priced at $500 to $1,900, and the more expensive version sold out.
A Robot Retirement Plan With a Sci-Fi Finish
Figure AI has retired its Figure 02 humanoid robot fleet, but the company did not simply warehouse the machines or sell them to a scrap dealer. Instead, it trained the robots to walk to the edge of a steel foundry furnace and jump into molten metal. The sequence, which sounds like a plot device from a science-fiction film, was presented by the company as a deliberate decommissioning process. The robots were no longer maintainable, and the company wanted to prevent their custom-built actuators and other intellectual property from leaking into the hands of competitors or parts brokers.
The decision turned an ordinary hardware lifecycle event into a public spectacle. Figure AI said it had considered destruction as the safest option, but the practical details were complicated. Humanoid robots contain batteries, electronics, metals, and proprietary mechanical assemblies. Simply discarding them would create both security and environmental concerns. Melting them in an industrial furnace would reduce the machines to a homogeneous material and make recovery of sensitive components far more difficult. The company's solution was to send its retired robots to a facility capable of handling the heat and the hazards.
Why Complete Destruction Made Sense to Figure AI
For a robotics company, a retired humanoid robot is not just a pile of metal. It is a working archive of design decisions. The Figure 02 machines contain custom actuators, motor controllers, sensors, wiring harnesses, structural components, and software interfaces. Even if the company wipes data from storage, the hardware itself can reveal how the robot moves, how it balances, how it manages heat, and how its systems are integrated. Competitors or unauthorized repair shops could learn from those parts. Figure AI said complete destruction was intended to keep that intellectual property from leaking.
The concern is not hypothetical. Hardware leaks are a familiar problem in consumer electronics, automotive manufacturing, and industrial equipment. A single discarded prototype can become a source of replacement parts, teardown videos, and reverse-engineering efforts. For humanoid robots, which are still expensive and relatively rare, the risk is even higher. A retired unit could be more valuable as a source of components than as a machine. Figure AI's decision to destroy the fleet rather than resell it reflects a calculation that security is worth more than salvage value.
There is also a safety dimension. Lithium-ion batteries can catch fire or vent toxic gases when damaged. Humanoid robots are heavy and contain high-energy actuators that can move unexpectedly if powered. Decommissioning them requires more than switching them off. The company had to find a facility willing to accept the battery risk, the mechanical risk, and the regulatory paperwork that comes with industrial disposal. That search shaped the public story.
Why Foundries Said No
According to Figure AI, none of the metal foundries it contacted in the United States and Mexico would allow a robot with lithium-ion batteries to jump into their expensive equipment. The refusal is easy to understand. A foundry furnace is a high-value industrial asset, and an unexpected battery fire or chemical reaction could damage the furnace, injure workers, or force a costly shutdown. Even a small disruption can cost more than the publicity value of destroying a robot.
The rejections also highlight a broader gap in the robot economy. Companies are building fleets of battery-powered machines, but disposal and recycling systems are not yet designed for them. Consumer electronics recyclers may not handle large humanoid robots. Scrap yards may not want batteries. Foundries may not want unknown materials in their melt. The result is a messy end-of-life problem that manufacturers are only beginning to confront. Figure AI found a willing partner in Finland, but the search itself shows that the infrastructure is not mature.
Training Robots to Jump in Simulation
Before the robots were shipped to Finland, Figure trained them in simulation to jump off cliffs. That detail separates the event from a simple controlled demolition. The robots were not pushed into the furnace by a crane or dropped from a platform. They were programmed to execute a final movement autonomously. Simulation training would have allowed the company to model the edge of the furnace, the robot's balance, the motor commands needed for a jump, and the timing required to clear the lip of the vessel.
When the robots arrived at the facility, they went to their deaths without error, according to the company, despite extreme heat and electromagnetic fields. If footage appeared to show hesitation, Figure suggested that the pause could have been instructed or that the robot was calculating the correct suicide trajectory. That explanation is darkly comic, but it also points to the sophistication of modern humanoid control systems. A robot that can adjust its movement at the edge of a furnace is demonstrating balance, perception, and planning. The decommissioning became an unintended capability demo.
The 75-Ton Furnace and Six Melts
The Finnish foundry in Imatra used a 75-ton electric arc furnace. Figure AI said the job was completed in just 24 hours and six melts. Electric arc furnaces use high-current electrodes to melt scrap steel, and they operate at temperatures that can liquefy metal. Introducing a humanoid robot into that environment requires careful scheduling. The robot's battery, plastics, and electronics would burn or vaporize, while its metal parts would become part of the melt. The process would produce fumes and slag that needed handling.
The six melts suggest that the robots were processed in batches rather than all at once. That approach would allow the foundry to manage the battery risk and the volume of material. The 24-hour timeline indicates a coordinated operation between the robotics company and the steel producer. It also shows that the destruction was not a single stunt but an industrial process with logistics, safety planning, and material handling. The furnace did not merely destroy the robots; it transformed them into a new material.
Schwarzenegger's Suggestion and Cameo
The spectacle had a celebrity dimension. Arnold Schwarzenegger, the former California governor and star of the Terminator films, tweeted to Figure AI CEO Brett Adcock that the company should melt the robots. The suggestion echoed the famous scene in Terminator 2: Judgment Day in which a shape-shifting robot assassin is destroyed in molten steel. Figure AI ultimately followed the advice, and Schwarzenegger appeared during the decommissioning. He traded a thumbs-up with one of the disintegrating robots and quipped, "Hasta la vista, Figure 02."
The cameo turned a corporate disposal decision into a pop-culture event. It also gave the company a memorable marketing narrative. Instead of explaining actuator security in a dry blog post, Figure AI could show a robot stepping into a furnace while a movie star delivered a catchphrase. The risk is that the stunt overshadows the serious questions about end-of-life hardware, battery safety, and intellectual property. The benefit is that people paid attention.
Metal Bars and the Market for Robot Relics
Figure AI did not stop at destruction. The company offered preorders on metal bars made from the remains of the robots. The bars were priced from $500 to $1,900, and the more expensive memento sold out. The merchandise turns the decommissioned fleet into a collectible. Each bar is a physical trace of a machine that once walked, balanced, and performed tasks. For buyers, it is part artifact and part conversation piece.
The sale also raises questions about how companies will monetize the end of a product line. Retired robots are usually scrapped, recycled, or stored. Selling pieces of them is unusual, but it fits a pattern in which technology companies turn internal milestones into limited-edition products. The sold-out higher-priced bar suggests that there is a market for robot memorabilia, at least among enthusiasts. It also shows that the decommissioning was designed for public consumption from the beginning.
What the Episode Reveals About Robot Disposal
As humanoid robots move from prototypes to commercial fleets, end-of-life planning will become more important. A robot is not a smartphone. It is large, heavy, battery-powered, and full of proprietary parts. Companies will need to decide whether to refurbish, resell, recycle, or destroy retired units. Each option has trade-offs. Resale can extend the product's life but may expose intellectual property. Recycling can recover materials but may not protect sensitive components. Destruction can protect secrets but may waste valuable hardware and create environmental challenges.
Figure AI's approach is dramatic, but it highlights a real gap. There is no standard playbook for retiring humanoid robots. Foundries may not want battery-laden machines. Recyclers may not be equipped to handle them. Companies may not want to release hardware into secondary markets. The Finnish foundry's willingness to participate made the operation possible, but it is not clear that the model can scale. The event also shows how public attention can shape corporate decisions. A celebrity suggestion became a marketing moment, and the resulting metal bars became collectibles.
The company said it really trained robots to jump autonomously, shipped them to Finland, and had them leap into a vat of molten steel. The Figure 02 fleet is now gone, reduced to metal bars and a video record. The most expensive mementos are already sold out.
Source: Gizmodo News